Use a Dexis Sensor as a Gendex Guide
Posted: Fri Nov 16, 2012 10:10 pm
This is a guide in progress. This is on a clean load of windows, that has never seen Dexis 8,9 or 10...
Things to do. Edit the Driver that is in the folder for the GX Picture 3.5.1 folder.
To use Dexis Sensor as a Gendex in GX Picture 3.5.1
Changes in the GXFusion INF File!
Dexis.spt = 1,,
;======================== Dexis Sensor IDs (x64) ==========================
;DEXIS_UNLOADED in this version uses the Dexis Vid/Pid for camera WITHOUT firmware
%VID_5328&PID_2009&REV_0000.DeviceDesc%=DEXIS_UNLOADEDx64, USB\VID_5328&PID_2009&REV_0000
;DEXIS_LOADED in this version uses the Dexis Vid/Pid for camera WITH firmware
%VID_5328&PID_2010&REV_0000.DeviceDesc%=DEXIS_LOADEDx64, USB\VID_5328&PID_2010&REV_0000
;DEXIS_LOADED in this version uses the Dexis Vid/Pid for a SIMULATED camera
%VID_5328&PID_2010&REV_0003.DeviceDesc%=DEXIS_LOADEDx64, USB\VID_5328&PID_2010&REV_0003
;=============== Dexis Strings ========================
VID_5328&PID_2009&REV_0000.DeviceDesc="Gendex GXS-700 Size 1 before renumeration"
VID_5328&PID_2010&REV_0000.DeviceDesc="Gendex GXS-700 Size 1"
VID_5328&PID_2010&REV_0003.DeviceDesc="Simulated Gendex 1 Sensor"
DEXIS_LOADED.SvcDesc="Dental Intraoral X-ray Sensor"
DEXIS_LOADED.GUID="{52EA7F3D-6D8A-4c27-9A82-C68EBE8B1AA0}"
DEXIS_UNLOADED.EXECSCRIPT="\systemroot\system32\Fusion\Dexis.spt"
DEXIS_LOADEDx64.SvcDesc="Dental Intraoral X-ray Sensor"
DEXIS_LOADEDx64.GUID="{52EA7F3D-6D8A-4c27-9A82-C68EBE8B1AA0}"
DEXIS_UNLOADEDx64.EXECSCRIPT="\systemroot\system32\Fusion\Dexis.spt"
YOU MUST USE DEXIS.SPT FROM DEXIS 9.0.2? 10's does not work!
Delete the cat file in the driver folder for automatic port installation!
If switching between Apteryx and Dexis 10, gxstart will need to be restarted?
Install GXPicture. Choose to install the last option GXFilter Enabled or Disabled (Up to you)
CALIBRATION FILES!
Install the Dexis Calibration Files and they cals should go in program files\Gendex\GXS-700 Calibration Files (or something)
Things to do. Edit the Driver that is in the folder for the GX Picture 3.5.1 folder.
To use Dexis Sensor as a Gendex in GX Picture 3.5.1
Changes in the GXFusion INF File!
Dexis.spt = 1,,
;======================== Dexis Sensor IDs (x64) ==========================
;DEXIS_UNLOADED in this version uses the Dexis Vid/Pid for camera WITHOUT firmware
%VID_5328&PID_2009&REV_0000.DeviceDesc%=DEXIS_UNLOADEDx64, USB\VID_5328&PID_2009&REV_0000
;DEXIS_LOADED in this version uses the Dexis Vid/Pid for camera WITH firmware
%VID_5328&PID_2010&REV_0000.DeviceDesc%=DEXIS_LOADEDx64, USB\VID_5328&PID_2010&REV_0000
;DEXIS_LOADED in this version uses the Dexis Vid/Pid for a SIMULATED camera
%VID_5328&PID_2010&REV_0003.DeviceDesc%=DEXIS_LOADEDx64, USB\VID_5328&PID_2010&REV_0003
;=============== Dexis Strings ========================
VID_5328&PID_2009&REV_0000.DeviceDesc="Gendex GXS-700 Size 1 before renumeration"
VID_5328&PID_2010&REV_0000.DeviceDesc="Gendex GXS-700 Size 1"
VID_5328&PID_2010&REV_0003.DeviceDesc="Simulated Gendex 1 Sensor"
DEXIS_LOADED.SvcDesc="Dental Intraoral X-ray Sensor"
DEXIS_LOADED.GUID="{52EA7F3D-6D8A-4c27-9A82-C68EBE8B1AA0}"
DEXIS_UNLOADED.EXECSCRIPT="\systemroot\system32\Fusion\Dexis.spt"
DEXIS_LOADEDx64.SvcDesc="Dental Intraoral X-ray Sensor"
DEXIS_LOADEDx64.GUID="{52EA7F3D-6D8A-4c27-9A82-C68EBE8B1AA0}"
DEXIS_UNLOADEDx64.EXECSCRIPT="\systemroot\system32\Fusion\Dexis.spt"
YOU MUST USE DEXIS.SPT FROM DEXIS 9.0.2? 10's does not work!
Delete the cat file in the driver folder for automatic port installation!
If switching between Apteryx and Dexis 10, gxstart will need to be restarted?
Install GXPicture. Choose to install the last option GXFilter Enabled or Disabled (Up to you)
CALIBRATION FILES!
Install the Dexis Calibration Files and they cals should go in program files\Gendex\GXS-700 Calibration Files (or something)