Completed procedures bug 17.4.7b (SOLVED)

For complex topics that regular users would not be interested in. For power users and database administrators.
Post Reply
User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Completed procedures bug 17.4.7b (SOLVED)

Post by wjstarck » Wed Jan 03, 2018 8:56 am

When procedures are set complete in the Appointment book module in 17.4.7b, the resolution of the program will change to a very high resolution that is impossible to work with, at least on my Dell XPS 13 laptop, The appointment book cannot be interacted with.

Thanks
Last edited by wjstarck on Thu Jan 11, 2018 10:49 am, edited 1 time in total.
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
jsalmon
Posts: 1551
Joined: Tue Nov 30, 2010 12:33 pm
Contact:

Re: Completed procedures bug 17.4.7b

Post by jsalmon » Wed Jan 03, 2018 10:10 am

wjstarck wrote:When procedures are set complete in the Appointment book module in 17.4.7b...
When you say procedures are set complete, do you mean when appointments are set complete?
When you say Appointment book module, do you mean the Appointments module? http://www.opendental.com/manual/appointments.html

Because you can only set appointments complete from that module (unlike in the Chart module) which will inadvertently set procedures complete. Did I translate you correctly?
The best thing about a boolean is even if you are wrong, you are only off by a bit.

Jason Salmon
Open Dental Software
http://www.opendental.com

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b

Post by wjstarck » Wed Jan 03, 2018 10:45 am

When you say procedures are set complete, do you mean when appointments are set complete?
That's correct
When you say Appointment book module, do you mean the Appointments module? http://www.opendental.com/manual/appointments.html
Yes, Appointments, sorry. Appointment book is a vestigial organ from my Dentrix days <<shudder>>. I really need to have that darn thing cut off one of these days :lol:
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b

Post by wjstarck » Wed Jan 03, 2018 12:09 pm

I should probably also mention that my resolution is set to 3200 x 1800 and my scaling is set to 200% (default is 250% which makes everything way too small and difficult to read)
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
jsalmon
Posts: 1551
Joined: Tue Nov 30, 2010 12:33 pm
Contact:

Re: Completed procedures bug 17.4.7b

Post by jsalmon » Wed Jan 03, 2018 12:31 pm

Sounds like someone got a 4K monitor for Christmas. Is this the case?

I slammed my monitors to 200% scaling and it didn't have the problem you described. My monitor / video card combination can't get to a resolution that high so I can't determine if that is the problem (even though I doubt it).
The best thing about a boolean is even if you are wrong, you are only off by a bit.

Jason Salmon
Open Dental Software
http://www.opendental.com

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b

Post by wjstarck » Wed Jan 03, 2018 12:43 pm

Haha I wish.

No, this is just my two year old Dell XPS 13" laptop

I'll post a screenshot later tonight
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b

Post by wjstarck » Fri Jan 05, 2018 7:57 am

Here's that screenshot:

https://imgur.com/a/TnWFV

To reproduce:
1) Double click in the Appointments module to create a new appt
2) Add treatment planned procedures to the appointment
3) Click 'OK' which will return you to the mangled appointment book

Incidentally, not sure if this helps, but I also notice the same behavior when I try to run OD in the VS 2015 debugger - the Appointment module always looks that way
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b

Post by wjstarck » Wed Jan 10, 2018 6:26 am

Just upgraded to 17.4.12.

Open Dental is scaled properly until I get to the login window. It's at that point now that the scaling gets munged as described above
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b (SOLVED)

Post by wjstarck » Thu Jan 11, 2018 10:49 am

UPDATE:

Setting the Graphics to OpenGL, Hardware Acceleration (checked), Use Double Buffering (unchecked), Show All Formats (unchecked), Format 3 has fixed the problem.

Thanks to Barry in OD Support and the Engineers for their hard work in getting me up and running again. :D

UPDATE 2:

Well, that works as long as I don't reboot :mrgreen: . So for now the workaround would be

1) Set settings as above. My resolution had to be set to 1024 x 768, Scaling 100%
2) SIgn out and sign back in. OD works, but resolution will give you a headache
3) Set resolution back up to highest (in my case 3200 x1800) and scaling to where everything looks nice (in my case 200%). This will stick as long as you don't reboot. If you reboot you will have to repeat steps 1-3 above

HTH
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
Justin Shafer
Posts: 596
Joined: Sat Jul 28, 2007 7:34 pm
Location: Fort Worth, TX.

Re: Completed procedures bug 17.4.7b

Post by Justin Shafer » Sun Jan 14, 2018 5:26 pm

wjstarck wrote:
When you say procedures are set complete, do you mean when appointments are set complete?
That's correct
When you say Appointment book module, do you mean the Appointments module? http://www.opendental.com/manual/appointments.html
Yes, Appointments, sorry. Appointment book is a vestigial organ from my Dentrix days <<shudder>>. I really need to have that darn thing cut off one of these days :lol:
Glad I got you off of that proggie. :D

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b (SOLVED)

Post by wjstarck » Sun Jan 14, 2018 5:53 pm

Yup.

You need to stop by sometime and see my Justin Shafer shrine - it’s almost finished :D :D :D
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

User avatar
Justin Shafer
Posts: 596
Joined: Sat Jul 28, 2007 7:34 pm
Location: Fort Worth, TX.

Re: Completed procedures bug 17.4.7b (SOLVED)

Post by Justin Shafer » Sun Jan 14, 2018 5:57 pm

wjstarck wrote:Yup.

You need to stop by sometime and see my Justin Shafer shrine - it’s almost finished :D :D :D
Shakes head no... LOL.. I thought you were working on restoring a truck?

Remember your SAN? And your awesome rack? You are still the only one in dentistry I know that had a SAN. I had never even seen a SAN before I saw yours... :D

User avatar
cmcgehee
Posts: 711
Joined: Tue Aug 25, 2015 5:06 pm
Location: Salem, Oregon

Re: Completed procedures bug 17.4.7b (SOLVED)

Post by cmcgehee » Wed Jan 31, 2018 8:17 am

Regarding the scaling issues, an attempted fix has been committed to 17.4.25.
"Open Dental was distorted when scaling was above 150%"
Chris McGehee
Open Dental Software
http://www.opendental.com

User avatar
wjstarck
Posts: 935
Joined: Tue Jul 31, 2007 7:18 am
Location: Keller, TX
Contact:

Re: Completed procedures bug 17.4.7b (SOLVED)

Post by wjstarck » Mon Feb 05, 2018 9:01 am

That works thank you
Cheers,

Bill Starck, DDS
Big Idea Software, LLC
Developer, EASy(Electronic Anesthesia System) for Open Dental
817-807-1709
TX, USA

Post Reply