Free Schick CDR Dicom software in USA - Schick 33 Sensor

For talking about and sharing plug-ins that have been developed by outside developers.

Free Schick CDR Dicom software in USA - Schick 33 Sensor

Postby rhaber123 » Thu Feb 23, 2017 10:54 pm

Schick CDR Dicom software

Schick CDR Dicom software is available for free for the USA and CANADIAN dentists
Sirona have it here for download ( almost 1 gb)
https://www.schickbysirona.com/download ... 1109693888

Schick Forum Link:
just register and you will be able to ask for support
https://www.schickbysirona.com/bbs3/ucp ... icom/?id=0

1- Install CDR Server option on your main OFFICE SERVER
2- Install CDR Client on your workstation

3- Activate the OD bridge for Schick:
Open Dental has a bridge to the Schick Software
Setup/Program Links/Schick from http//wwwschicktechcom
just enable it, and it will integrate with Open Dental nicely
The OD bridge will work with the CDR Dicom software.
The OD bridge will pick the first name, last name and patient ID number
...thats it....
Assuming that your hardware is installed correctly.. you will be taking xrays from inside the CDR Dicom software,
and the xrays will be saved in the schick software and not in Open dental ... OD will just bridge to the schick software.


4- BACKUP and RESTORE - Validation Wizard:
Your Xrays are in the C:/Images folder. To backup these xrays, just copy and paste the C:/Images folder.
After you backup your xrays, and now you want to restore them, you can copy and paste all the xrays back to the C:/Images folder,
On your desktop,
click on the CDR admininistration utility,
click on tools,
and click on VALIDATION WIZARD ,
follow the instructions now....it might take over an hour for the xrays to be validated , if you have a lot of xrays


5- Schick software can work with many USB intraoral cameras sold on Ebay, scanners, etc.... from other companies.
Tried it with an intraoral camera from Ebay and worked. If you have the USB driver and windows can find it, Schick CDR Dicom software most of the times will find it,

USBCam4 Drivers and Documents
download the cam4 driver:
this package has the necessary video modules to run the cam2 and any USB camera , even those on Ebay
If windows can find the USB camera, Schick CDR Dicom will find it.
https://www.dentsplysironasupport.com/e ... tware.html
Have all software closed, and have camera disconnected until all the drivers have been installed.


==========================================================================================================================================================


SCHICK / SIRONA OFFER VERY HIGH QUALITY SENSORS - HARDWARE

==========================================================================================================================================================

I have been using the Schick CDR software SINCE 2004 and Love it. At that time I had the regular Schick sensor
Schick software - CDR Dicom- integrate VERY WELL with Open Dental, it is already preset in Open Dental, it has its own bridge. A couple of clicks and you are ready to go.

1- FONA sensors, are the international versions of the old SCHICK SENSORS

2- Sirona Xios XG Select Sensor = Same As SCHICK ELITE

3- Sirona XIOS XG Supreme Sensor = Same as Schick 33
Available on Ebay today, from a USA seller for $4500 : http://www.ebay.com/itm/Schick-Sirona-X ... SwuhhXWCmI
Schick 33 is a much better sensor than the Schick CDR Elite

4- you will need also a SCHICK hub for about $1200 to $1500 (be careful, you do not want to buy the HS white blue hub, will not work with Schick 33)
Schick Elite or Schick 33 Remote USB HUB : http://www.ebay.com/itm/Schick-Elite-Re ... Sw-0xYiQfH
this hub work with the ELITE sensors and SCHICK 33 sensor, they use the same hub.

5- Sirona also offer the wireless option for the XIOS XG Supreme / schick 33. ( $3800 - $4000)
a- you can transform it into the WIRED and original format, by buying a cable that cost about $300 to $400
Schick CDR 33 or Elite Spare Cable Kit : http://www.ebay.com/itm/Schick-CDR-33-A ... Sw9GhYkk-G
b- and you still need the hub about $1200 to $1500

The advantage of the new Schick sensors is you can replace the cable by yourself by just unscrewing two screws from the sensor, and screwing back the new cable
Some cable for the Schick Elite are different than the schick 33, and the new ones have an adapter that fits both. be carful when you buy the cable
http://www.ebay.com/itm/Schick-CDR-33-A ... Sw9GhYkk-G

Almost 3 years ago, I bought the XIOS XG SUPREME ( same as Schick 33) from an international seller for around $6000
Downloaded the software from Schick website and I have no problem for the last 3 years.
I did all the installations. Not very hard. ALL instructions for Schick 33 are the same as Sirona Xios XG Supreme, instructions available on SCHICK/Sirona website
It is exactly the same sensor, same hardware, same drivers, etc.... just have a different name, but at a much lower price

The warranty apply only in the country where you bought the sensor from. the warranty will not cover it internationally, or here in the USA
If you have a problem, you have to mail it to that country. I gambled and won. Lucky me, I have no problem for 3 years. VERY GOOD PRODUCT BY SIRONA

SCHICK 33 sensor, and CDR Dicom Software offer a very good quality Xray - one of the best

Tried the software with an intraoral camera from Ebay and the intraoral camera worked too

***set it as default or disable any internal camera if you are using a laptop
or unplug any other external camera if you use a Skype camera

========================================================================================
========================================================================================
Anyone who is interested and want to try it and if you are a dentist in the USA or Canada
1- Get the software for FREE
2- Buy an intraoral camera from EBAY and test the functionality of the software and how it easily integrate with OPEN DENTAL
3- And then buy one of the above 3 types of sensors

========================================================================================
========================================================================================
Sirona XIOS XG Supreme Sensor = Same as Schick 33
I think it is the same hardware, just different packaging. I have been using it for almost 3 years now. For the installation I downloaded everything from the schick website. I did not use what came with the sensor. I had no problem. Easy installation

Before I purchased the items, I contacted Sirona, emailed them in Europe, they were more helpful in Europe .
I asked them few questions about the wireless option, and they confirmed to me that I can ad the cable to the wireless sensor and it will become the WIRED OPTION, they told me that it was the same sensor head . I think more technical questions could be directed to Sirona/Schick directly .

The quality that the schick 33 /Sirona Xios Supreme sensors and the SCHICK CDR Dicom software provide is amazing. I can not roll back.

When you buy the wireless sensor, you get everything that you need to take digital xrays,
The advantage is, you can move it easily from one operatory to another, you do not need to buy multiple hubs, so it's cost is the best for multiple operatories.($4000 - $4500)
you just take the sensor from one operatory to another, very efficient and easy to use.
It connects through your wireless network. So if you have good WIFI coverage, you will connect easily, but there may be a slight delay in processing the xray when an Xray is taken.
My assistant did not like this delay when she was taking a full mouth X-ray, she said: " it takes for ever" , for her it was eternity although it was few extra seconds per xray taken, and if your assistant is not happy, you are in big trouble. If you are taking few xrays, you will be OK, this will be a good option for multiple operatories.
YES it was slower. That is the reason why we changed it to the WIRED option.

NOW IT IS SUPER FAST, THE BEST!
rhaber123
 
Posts: 301
Joined: Fri Dec 11, 2009 1:09 pm

Return to Plug-ins

Who is online

Users browsing this forum: No registered users and 1 guest

cron