Initial setup - 192.168.1.*
Expanded setup 192.168.2.*
Both networks are connected to each other via Ethernet Over IP - (EoIP) using DD-WRT routers http://www.dd-wrt.com/wiki/index.php/EoIP_Routing and seting up advanced routing we were able to bridging both subnets enabling us to browse from 192.168.2.* network to the 192.168.1.* set and vice versa - not the most ideal setup (insecure) but its a best-case in our situation for the moment until we upgrade
Most things work fine like folder browsing and other aspects (we dont fully see other networked computers in the network neighbourhood) but by using their static IP's we are able to browse to view all their shared folders etc.
But when Open Dental tries to connect to the main servers OD Database - (using the server IP as the server name) it gives a timeout - im assuming this is a MySQL database timeout and the pop-up prompt comes as
Code: Select all
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding
To test - I have pinged to the server's IP - and I get good results and Ping average 25ms
If I telnet to the server's port 3306 by using "telnet 192.168.1.100 3306" it comes back with a garbled MySQL password prompt - showing that the 3306 port is open and accessible
I have BitDefender as an antivirus which I have disabled / turned it off and I don't see any changes in the results
The Server / network sits behind a DD-WRT router and I have toggled with many aspects but no results
Turning On/Off the SPI Firewall - no change
Adding port fowarding 3306 in DD-WRT to the OD Server 192.168.2.100 - 3306 - no change
Have placed the OD Server in DMZ - no change
What might be the issue here - any thoughts? - im at the moment stumped