Use a Dexis Sensor as a Gendex Guide

For complex topics that regular users would not be interested in. For power users and database administrators.

Use a Dexis Sensor as a Gendex Guide

Postby Justin Shafer » Fri Nov 16, 2012 11:10 pm

This is a guide in progress. This is on a clean load of windows, that has never seen Dexis 8,9 or 10...

Things to do. Edit the Driver that is in the folder for the GX Picture 3.5.1 folder.
To use Dexis Sensor as a Gendex in GX Picture 3.5.1


Changes in the GXFusion INF File!


Dexis.spt = 1,,

;======================== Dexis Sensor IDs (x64) ==========================

;DEXIS_UNLOADED in this version uses the Dexis Vid/Pid for camera WITHOUT firmware
%VID_5328&PID_2009&REV_0000.DeviceDesc%=DEXIS_UNLOADEDx64, USB\VID_5328&PID_2009&REV_0000

;DEXIS_LOADED in this version uses the Dexis Vid/Pid for camera WITH firmware
%VID_5328&PID_2010&REV_0000.DeviceDesc%=DEXIS_LOADEDx64, USB\VID_5328&PID_2010&REV_0000

;DEXIS_LOADED in this version uses the Dexis Vid/Pid for a SIMULATED camera
%VID_5328&PID_2010&REV_0003.DeviceDesc%=DEXIS_LOADEDx64, USB\VID_5328&PID_2010&REV_0003

;=============== Dexis Strings ========================
VID_5328&PID_2009&REV_0000.DeviceDesc="Gendex GXS-700 Size 1 before renumeration"
VID_5328&PID_2010&REV_0000.DeviceDesc="Gendex GXS-700 Size 1"
VID_5328&PID_2010&REV_0003.DeviceDesc="Simulated Gendex 1 Sensor"
DEXIS_LOADED.SvcDesc="Dental Intraoral X-ray Sensor"
DEXIS_LOADED.GUID="{52EA7F3D-6D8A-4c27-9A82-C68EBE8B1AA0}"
DEXIS_UNLOADED.EXECSCRIPT="\systemroot\system32\Fusion\Dexis.spt"
DEXIS_LOADEDx64.SvcDesc="Dental Intraoral X-ray Sensor"
DEXIS_LOADEDx64.GUID="{52EA7F3D-6D8A-4c27-9A82-C68EBE8B1AA0}"
DEXIS_UNLOADEDx64.EXECSCRIPT="\systemroot\system32\Fusion\Dexis.spt"


YOU MUST USE DEXIS.SPT FROM DEXIS 9.0.2? 10's does not work!

Delete the cat file in the driver folder for automatic port installation!

If switching between Apteryx and Dexis 10, gxstart will need to be restarted?

Install GXPicture. Choose to install the last option GXFilter Enabled or Disabled (Up to you)

CALIBRATION FILES!
Install the Dexis Calibration Files and they cals should go in program files\Gendex\GXS-700 Calibration Files (or something)
Last edited by Justin Shafer on Wed Dec 17, 2014 4:38 am, edited 1 time in total.
User avatar
Justin Shafer
 
Posts: 569
Joined: Sat Jul 28, 2007 7:34 pm
Location: Fort Worth, TX.

Re: Use a Dexis Sensor as a Gendex Guide

Postby Justin Shafer » Wed Dec 17, 2014 4:39 am

Updated for 3.5.1
User avatar
Justin Shafer
 
Posts: 569
Joined: Sat Jul 28, 2007 7:34 pm
Location: Fort Worth, TX.

Re: Use a Dexis Sensor as a Gendex Guide

Postby egillk » Sat Aug 20, 2016 4:34 am

I have been using Dexis since 2000 and had a new sensor and a upgrade in 2005 if I remember right. Because of restrictions on behalf of Danaher the company that bought Dexis and also KavO in Germany I had to living in Iceland buy Gendex instead of Dexis when going over to USB sensor. I was not allowed to buy dexis sensor. So the question is can I connect the Gendex sensor to My existing Dexis software, I am using the implant part of the dexis software a lot.

Kind regards

Egill Kolbeinsson DDS
Iceland
egillk
 
Posts: 1
Joined: Sat Aug 20, 2016 4:15 am


Return to Advanced Topics

Who is online

Users browsing this forum: No registered users and 1 guest

cron