Going digital and paperless and need to scan most recent films ( BWX,PAs, FMX) into patient OD charts.
Have the Fujitsu ScanSnap to scan charts and will only need a transparency scanner until latest films of existing charts are scanned into OD....since I won't be needing a transparency scanner once films are scanned dont need a new,expensive scanner...any suggestions of one that will do the job?
Inexpensive transparency scanner
Re: Inexpensive transparency scanner
Find an EPSON 1680 Pro w/ transarancy adapter on ebay.
It will scan a full size pano and mounted FMX.
It will scan a full size pano and mounted FMX.
Candy is dandy, but sex won't rot your teeth.
Cheers!!!
Go Bears!!!!!
Savvy
Cheers!!!
Go Bears!!!!!
Savvy
Re: Inexpensive transparency scanner
Here's one for a pretty good Buy It Now price. (no affiliation)
http://www.ebay.com/itm/Epson-Expressio ... _64wt_1141
http://www.ebay.com/itm/Epson-Expressio ... _64wt_1141
Candy is dandy, but sex won't rot your teeth.
Cheers!!!
Go Bears!!!!!
Savvy
Cheers!!!
Go Bears!!!!!
Savvy
Re: Inexpensive transparency scanner
I was looking this up since you reccommend it but the User Guide says.savvy wrote:It will scan a full size pano and mounted FMX.
So how does one fashion a film guide to fit a Pano or a FMX or a single mounted Xray which endodontists sometimes send us after treatment.Using the Film Guides
You can use the four film guides that came with the transparency unit to scan 35mm slides, strips of 35mm negative or positive film, 120‑size or 220‑size format film...
What we currently do is mount the film on a illuminated Xray viewer, then take a Ring Flash photo using our Macro lens. Macro lenses are typically very sharp and if you balance the flash and the Xray viewer's light output you get both a 'scan' of the XRAY and any notes on the cardboard mount.
This works if the volume is low but we have some legacy film which we might want to digitize so your input on how you use the scanner will be very helpful.