I am on version 7.3.7
May have uncovered a small bug -- I wouldn't think this was intended behavior. First, select a patient, then open the chart module. The program defaults to the first tab which is the Enter Treatement Tab. Click on any of the other tabs (Missing Teeth, Movements, Primary Teeth, etc) and it opens that particular tab. Now click back on Enter Treatment. Instead of opening the Enter Treatment Tab, it essentially closes that tab and makes the grid on the lower right fill the right side of the page. It takes a second click to open the Enter Treatment Tab.
I understand that this was feature in past versions that you could click on the Enter Treatment Tab a second time and close it so the grid became larger. Now it is closing it when you try to re-select it after being in another tab.
Another question. In previous versions, was it only the Enter Treatement tab that you could click on a second time and close it to make the grid bigger? I thought this was a feature of all the tabs. I can only get the grid to enlarge now on the Enter Treatment Tab. All the other tabs don't do anything when you click on them a second time. Maybe this is unchanged from earlier versions. I can't remember.
Jeff
Chart Module --Enter Treatment Tab
-
- Posts: 172
- Joined: Mon Aug 04, 2008 12:39 pm
Re: Chart Module --Enter Treatment Tab
to the first issue, Yes, bug, submitting now, thx
Re: Chart Module --Enter Treatment Tab
I was having that same problem! I thought I was going mad as it disappeared on me all the time!
-
- Posts: 172
- Joined: Mon Aug 04, 2008 12:39 pm
Re: Chart Module --Enter Treatment Tab
Fixed bug [Chart module tab behaved wrong when clicking]. Released in 7.4.8 and 7.3.9