Open Dental

parksjdp

I guess my other one would be how many patients we have from each zipcode

parksjdp

Are you talking about the daily production on the dashboard to the right on the appt. screen? If so we have this about every 3 months maybe and we figured out that they are tied to a treatment plan that has been overridden with fees. So if you go into a procedure from the default treatment plan and ...

parksjdp

Hi Everyone I hate to bother with this question and I tried looking myself but I need a couple of reports that I can't find or figure out. 1. General Patient Demographics (patients by age, patients by zip code, patient with insurance,) 2. How many of active patients are in recall program (ie, how ma...

parksjdp

Is there a way to limit staff from seeing the audit trail in the appt edit window? I have it restricted in the actual drop down audit trail under misc, however they still have access to some of it through the appt edit window.

parksjdp

RotKT wrote:what if i want to 1 server for 2 offices?
thanks

You can use terminal services if your server allows for it. It works quite well most of the time.

parksjdp

Not really. The referral report that is built into the reports function show this. Referring Patient/Person Last Name First Name Count Prodcution completed I would also like to know who that person referred without much digging. So lets say that I reffered Joe Blow to your practice and he had a RCT ...

parksjdp

Did you set it to refresh? That should be checked right below your triggers. If not then I am not sure, as long as the triggers are being set by your staff as the patient in moving throughout the practice, then I don't know.

parksjdp

The appointment is much faster since you are catching multiple procedures all at once. The only reason to set procedures complete would be if you were still using a paper schedule. Jordan I am not sure I understand this. What do you mean, we set all procedures complete when we are done. Are you say...

parksjdp

Is there a way to add to the referral report, who actually got referred? Or is there already a way to do that? Currently, all I can see is the person who referred and how much in production the generated.

Thanks

parksjdp

If you go to the main webpage and at top select user manual. You will see all the modules and then right below that is a couple of tabs, one for Future Versions, and one for Previous Versions. This gives you a pretty good run down of what changes and improvements have been made. Also gives you an id...

parksjdp

Is there a way to get the referred to and referred from list to be separte? We have started to track where new patients are being referred from, however it now has started to clog up the referral list with all the patients. It is nice to have only Doctors listed when trying to find a referral out.

parksjdp

For the color questions, we have dentures set to light color, however when we add a tooth to a denture it shows up in dark. For that procedure I would then check to make sure it is set to light in the setup window. Its not really a issue of TP's not showing up properly as it other things such as the...

parksjdp

Is there a way to e-mail a supply order to our supply rep from the Supply Inventory screen or anywhere in OD for that matter?

parksjdp

We recently have been seeing old restorations that show through PFM's on the 3d chart. For example, in 2002 patient had composites place on 29 & 31. In the meantime PFM's were placed, however the old composites still show through. Is there a heirarchy for what should show and what should not. We hav...

parksjdp

So do you then just waste the other quaters of the sheet or is there a workaround?

parksjdp

Jordan

Does the sound from the messaging system work through Terminal Services? I would guess no, but did not know.

parksjdp

No one?

parksjdp

What are the pros and cons to updating to a beta as opposed to the stable version?

parksjdp

Are they unchecked in your set-up?

parksjdp

I have read a lot of posts and comments regarding labels and being able to print them off. I have a dumb question, What do you all use them for? The only time we would need a set of labels would be for statements and for recalls, both of which are already printed for you. Sorry if this is a dumb que...

parksjdp

Give this a try. Be sure and change your dates to the period you are looking for. I have not verified all TP's in the report, but it should give a good start. Set @StartDate='2007-01-01', @EndDate='2008-04-31'; CREATE temporary table tp SELECT patnum, (sum(procfee))as $Unscheduled, Date_format(datet...

parksjdp

Yes, it worked great, however we recently exceeded quota on the number of files that can be sync'd, I beleive 10,000, so we had to find another option and are still trying to find one that worked as good. We use it to sync digital images between out main and satelitte office.

parksjdp

Hi! We are going to be completing our data conversion to Open Dental next week... and hopefully will be up and running first thing next month! I am in the process of sorting out what we need to do for eclaims, electronic attachments, etc. I talked to the folks at DentalXchange and they said that ec...

parksjdp

Can you only do one planned appt per patient. For example, if a patient has a TP for PFM, can you plan both appts at one time or does the planned appt tracker only hold on planned appt?

parksjdp

glen wrote:How do I find pts that we have already seen, dx caries, and need to be scheduled to come back for those fillings. Just like with recall, is there a way to get a list of all patients who need treatment

If you have not been setting up planned appt's, then there are some custom queries that will work.

parksjdp

A number of Medicaid plans have had significant processing difficulties since the NPI mandate went into effect in May. We have worked through the issues for most state Medicaid programs and would be happy to see if we can assist your office. Please let us know which Medicaid plan you are having dif...

parksjdp

Just updated to Version 5.7.18 and I have a couple of questions. 1. When they say that tooth ranges now show in chart, account, tp, and appt. edit windows, what does this mean (i.e. denture ranges, bridges, etc) I just don't see how this works and what it tracks. 2. Anyone try to download the bank d...

parksjdp

Well your no help :D In regards to the fees, we get enough stress at $665 a crown, but I would like to raise them. My fee schedule would probable make you sick to your stomach, yet I have to still stay in business with the same lab/supply/equipment costs as the high $ practices. OK sorry for the ran...

parksjdp

For those that use Tesia We are having some problems with our Medicaid insurance claims. They say that they have not gotten a claim from us in over 2 months. We then contacted OD and they said that we have the acknowlegments from Tesia so it must be something on Tesia or Medicaid's end. How do these...

parksjdp

[quote="savvy" PS> The bridge graphic never did disappear.....until I deleted it. Got to be a bug!![/quote] Yes, but once you delete it, don't you have a balancing problem for that acct? For example, if you deleted procedures for a 3 unit bridge, wouldn't it show a credit balance of $2100 since you ...

parksjdp

I don't know if this is a bug or not........ In the above example, if I choose tooth number 5 and select "missing", everything goes away (as expected). However, when I choose teeth # 10, 11, 12 and 13 and select "missing" the crown graphics remain (the tooth, and Rct graphics are gone). Cheers!! Ye...

parksjdp

Patient has a 3 unit bridge from 18-20 placed 8/06. Patient then comes in with fracture of 18 so that only the pfm on 20 remains. How do you update the chart so that the pfm's on 18 and 19 do not show up. I can't just delete the procedures because that will create a differnce in the account balance ...

parksjdp

Only think that I can think of is that the procedure is set to wrong color or type in procedure listing. Is in only on these teeth? In other words if this exact procedure code was completed on tooth #4 what happens?

parksjdp

What does everyone do with Treatment plans that are not choosen? Currently, we will save different options (ex. Option 1 RCT/PFM Option 2 Ext.) Lets say that the patient chooses Option 1 and we perform the procedures and set it complete. Now the only way to get the red x off that tooth from the TP'd...

parksjdp

If want a count column also of new patients use this custom query New Patients in Date Range with Date of last visit and Procedure Count SET @pos=0, @FromDate='2008-06-01' , @ToDate='2008-06-31'; SELECT @pos:=@pos+1 as 'Count', patient.PatNum, LName, FName, DATE_FORMAT(MAX(ProcDate),'%m/%d/%Y') AS ...

parksjdp

Try this query and just change your dates for your month range. Also, I remember there being a new report in a new version that was to have this report IIRC.

SELECT * FROM PATIENT
WHERE DateFirstVisit >= '2008-06-01'
AND DateFirstVisit < '2008-06-30'

parksjdp

I believe it is a feature that is planned. Jordan?

parksjdp

97 I just checked ours and the ack code is missing for us as well. It appears that June 9 was the last time we got any acknowledgement back. When was the last day for you? So they are getting the claim, we just don't know that? Then this should not slow down payments correct? I only ask because my A...

parksjdp

Go to list, providers, then double click on the hyg. that you want to change color for. It is in that screen.

parksjdp

If you are trying to delete a procedure from a treatment plan, in the chart module, find that procedure and delete it there. It then won't show up anymore.

parksjdp

Are you talking about removing procedures from the appt or from the treatment plan, whether saved or default? If it is from the appt. double click the appt. and in the upper right hand of the screen will be the procedures in the TP. the highlighted ones are the ones linked to that appt. click on the...

parksjdp

Thanks guys.

parksjdp

Does anyone know if you can have multiple sig pads connected to one PC for signature capture. We have a situation that would make signing TP's much easier if you could. We have essentially 3 places in which we would like to be able to capture signatures. 1. Patients seen on Dr. side and checks out o...

parksjdp

No requirement to buy sundries from them exclusively? I guess that is would be a good marketing plan to give it away just to lock up the sensors portion of the market.

parksjdp

Is there a way to purge old saved treatment plans and have them archived in the images module? For example, we have a couple of patients that have 8-10 saved treatment plans that have been completed, however we want to keep the perm record of them just not in the TP module. Would it be best to just ...

parksjdp

Does anyone know if you can have multiple sig pads connected to one PC for signature capture. We have a situation that would make signing TP's much easier if you could. We have essentially 3 places in which we would like to be able to capture signatures. 1. Patients seen on Dr. side and checks out o...

parksjdp

Here a couple of ways that I know.

1. Double click on patient information in the family module

2. Under Misc set-up, you can select the pat # to show in the title bar.

parksjdp

Wouldn't you just print them a walk-out statement for that day? It would show charges and payments, whether cash, check or credit card.

As far as the accounting system, I don't use it so I cannot help you.

parksjdp

Jordan You can remove them correct?. I think that if you double click the procedure in the saved TP you can delete it. The big thing for us is adding a procedure. Some of my staff get a little ahead of themselves with TP's and for get to add certain procedures and then I have to correct them be dete...

parksjdp

Got it, thanks

parksjdp

So you can't just import a .jpeg? How can I get those from you if you are willing to share.

parksjdp

2 things

1. Is there anyway to get a procedure into a saved TP or do you have to redo the entire thing?

2. How do you reorder the procedures? Either in the TP or the Chart?

parksjdp

On the prodceudure button edit window, there is a spot to import an image, is this capable of doing this? If so how? If not, is there a way to get more images into the database to choose from?

parksjdp

Couldn't you just change the figures on the saved treatment plan to show your discount amounts? You would also have to change the fee in the acutal chart to reflect the discounted price then as well. Another idea would be to set up a N code that would be for Cash Discount. You could then set up a qu...

parksjdp

We use FormSource Inc. out of Milton, WA. Not sure that we have had any problems, use #10 Window, with #9 return and Standard perforated laser statement paper from them.

parksjdp

How about the web version? I would assume that if you are using the web version that you could use the sig pad, no matter where you are.

parksjdp

If you are not, it is quite easy to use and set up. I have had good luck with it, even though it is not as fast as one would like, but it is a remote connection. Also, David says there is a way to set the free version up with printing capabilities, even though I have not been able to get it going, n...

parksjdp

Can you use a sig pad at a remote location through terminal services?

parksjdp

Mike Sorry for the confusion. You will need to have a logmein session active. Once you have that, at the top right of the logmein screen, you will see some icons with settings for logmein. There will be on that says color quality (looks like windows icon). Here is where you make those changes. You c...

parksjdp

Mike

I think that he means the quality of the screen view. To adjust, you must click on the color quality icon (looks like the microsoft windows icon) and adjust from grayscale to high quality.

parksjdp

What Sig Pads are everyone using? Also, the office that do not use Sig Pads, how are the progress notes signed (i.e. initialed in the note, sign with mouse, etc). Anyone know the requirements for how notes need to be signed or authorized? Lastly, I assume that a sig pad will accomdate signing progre...

parksjdp

I know that there has been a lot of conversations regarding TP's and being able to save multiple options for patients and have the graphical chart print out only the procedures in the saved TP, however I cannot remember if they have the ability to apply insurance coverages individually. For example,...

parksjdp

It will be some work, however I think that the pros def out weigh the trouble of getting it inputed and updated. I think that this way, name grabbers ability to continue to support the bridge will not be an issue with future upgrades, as well as the certainty of not duplicating patients. Thanks for ...

parksjdp

I started troubleshooting with limited success, here are my steps and results 1. Changed the ID # in Apteryx to match chart # in OD - Did not work, still wanted to create a new patient 2. Added SSN in apteryx to match OD - Worked however still wanted to update the file to not include middle initial ...

parksjdp

OK, we have 1395 patients in Apteryx. I could have them change the ID's in apteryx, that should not be a problem, however I want to make sure that will fix everything, so I changed a few of them and it still gives me the "do you want to create a new patient". I think this is because when the were in...

parksjdp

No they are not. OD is trying to find patient in Apteryx by chart #, however Apteryx does no have pat #, Chart # or SSN, they only have their ID, which started with #1 through #??? when we add patients. So the only way to get these 2 to match would be to go into each patient file in Apteryx and add ...

parksjdp

Robertdds

Did this help? Have you got your reports and production views looking good.

parksjdp

Not to sound to dumb, but how do I find that out and what am I looking for?

parksjdp

OK, I got the OD built in bridge to work, however whenever I click on it, Apteryx tells me that they are not a patient and they want to create a new one. Is there any way to have them data drill for the same info so that it finds the existing patients that already exists?

parksjdp

I'm curious. Haven't you ever had problems with duplicate names? Does the data drill part of it work, where it supposedly goes into the database and gets the birthdate for the person? Are the patient Id's used in Apteryx the same as the ones use in Open Dental? Have you ever had a problem with the ...

parksjdp

A couple other things that you will need to do. Under set-up and opertories, make sure that your hygenist is listed, along with the dentist as the provider for that op. Also, goto lists and procedure codes. Identify what codes you would like the hygenist to get credit for production, double click on...

parksjdp

Robert_dds wrote:please show me how you program to do that. Thanks.

First, with the create or edit appt. screen open (double click a scheduled hygeine appt) do you have a dentist and hygenist selected? If not, you need to have you as provider and your hygenist selected as hygenist. Try that and see what happens.

parksjdp

I have 4 ops. Op. 4 is set up for hygenist only. Daily production under Appt. tab shows total production for for op.1 to op. 3 only. Why not including hygenist production also??? Is this right? Is there a way to print out report to show separate production for Dr. and Hygenist at the end of the day...

parksjdp

I have 4 ops. Op. 4 is set up for hygenist only. Daily production under Appt. tab shows total production for for op.1 to op. 3 only. Why not including hygenist production also??? Is this right? Is there a way to print out report to show separate production for Dr. and Hygenist at the end of the day...

parksjdp

First of all, if you use Apteryx, DO NOT use the name grabber. Use our built-in bridge. The name grabber was designed as a workaround for practice management software from companies that refuse to support bridges. This refusal to support bridges is one way that these companies restrict your freedom...

parksjdp

I just got a message from MetLife I think it is that says our e-claims don't have our NPI # on them. I thought for sure I set this up last year actually thought it was working, but throughout the year I got a few messages that asked us about our NPI, but I thought they were just automated messages....

parksjdp

Hi all

A quick question. Is there anyway to get a 4bw mount imported into OD to view in the chart at the bottom of the screen, instead of always having to name grab and view in appteryx?

Thanks,

parksjdp

I see a trend here... dudes managing the dental office for thier wives. Count me in as well, except she is a client of mine as I have my own accounting, consulting, and tax practice. Anyway, I will give my input as well. My wife has been in practice for 3 years and in Sept. 07', we had some equipmen...

parksjdp

Ahh, I see. Your a sneaky one aren't you.

parksjdp

yes, I already tried this setup over the internet, for direct access and it was REALLY slow. logmein (FREE) (or TS i guess, but I haven't ever used it) is much better solution at the moment from a remote location. Do you not have limitations with Logmein as far as printing goes? I did not think the...

parksjdp

You need to goto setup, appt views, and then make sure that your hygeine provider is highlight along with all the other providers that you want to show up. So, if you have a custom view set-up, just double click it to edit and select ctrl plus any additional provider.

parksjdp

Not specific to Suni sensors, but we have tried quite of few holders and have finally settled with holders from Troll Dental. The staff seems quite happy with them.

parksjdp

So I should call in and get a update code so that I can go straight to Ver. 5.5?

parksjdp

When I updated on Friday, it only let me go to 5.2.17. How do I update to 5.5 then if that is recommended?

parksjdp

I just updated from 5.2.16 to 5.2.17, yet versions 5.3-5.6 are available. Should we wait for these versions to come out of beta or are they available for use now? What are the pros/cons of doing this.

parksjdp

I know that we have many instances when we need to create multiple treatment plan options. Its not that we don't have a good idea of what we want them to do, it is the patients that want to see all the options and then take them home to go over and discuss with spouse. For example, today we had 6 in...

parksjdp

Are you using terminal services or any other remote connection. That happens with our terminal services connection.

parksjdp

David

Thanks for the correction, that is good to know.

parksjdp

We have set up our codes to show the default amount of time for each procedure. Specifically, our hygiene appts are set-up to be one hour appts for Ex, Pro, 4BW. However, when you schedule that appointment from the quick proc buttons, it does resemble how we set it up on the schedule (it schedules 1...

parksjdp

If it is red, that is indicating that an insurance claim needs to set-up for that appt. Once that claim has been sent it will be replaced with a solid thin black line indcating that this patient has insurance.

parksjdp

If I am understanding the correctly, would it not be just as easy to use the default notes are part of the procedure code setup? That is how we use it and it saves a lot of time. The assistants and Dr. just needed to remember to fill in specific information such as tooth #, etc.

parksjdp

Anyone know how to export the file for monthly statements? We are trying to outsource our statement processing, however I don't know where the file is or how to get it. Thanks

parksjdp

What are auto notes used for?

parksjdp

Sorry for the confusion, they are indeed pontics.

parksjdp

No we are not splinting natural teeth to implants. The patient has been referred to a periodontist for perio related problems, right before her first appt w/periodontist, she broke #11 off below gumline. The periodontist then determined that #'s 8,9,&10 had class three mobility, 7 was missing. The o...

parksjdp

It does look great!! One more question. We have a treatment plan for a patient, it includes that following: Implants on 7,9, & 11 Referred for implants. We will place crowns on 7-11, with 8 & 10 being bridge abutments. How would you treatment plan this & with what codes? Also, there is a possibility...

parksjdp

Thanks

I will give it a try.

parksjdp

I know I have seen the answer by Jordan somewhere, either here or on DT, however, how do you chart an implant?

parksjdp

On the schedule, is there a way to have an employee schedule show up on the appt. view window as off, as opposed to the actual schedule. For example her is what I am looking for:

Employee A 8-5
Employee B 8-5
Employee C 8-5
Employee D Off

parksjdp

I have fixed the schedule view. As far as the bug, will that require an update?

parksjdp

Would there be another way to change the color associated to the providers then?

Also, how do I get the lunch hour to show as closed on the appt view? In my schedules I have them set for 8-1 and 2-5, however it shows 1-2 as open as well.

parksjdp

I am trying to make changes to my providers list and when I go to List - Providers it says Column 'IsHidden' in field list is ambiguous. Then it shows no providers.

Any help on getting my listing of providers?

parksjdp

Would that apply insurance estimates independently of each other then? For example, you could do endo, post/core, crown on #19 in one saved treatment plan. On the other would be the extraction. Since the first treatment plan would would likely use up all insurance benefits, would the the second show...

parksjdp

I think that I may have found most of my problem and would have saved myself a lot of work. I did not have the include negative balances checked. I assume that this will make a big difference and get me the correct number. I apologize for entering into this lengthly discussions over a simple oversig...

parksjdp

I have the PRAC, NOTE, and DOC1 as hidden providers, is there a chance this would throw off my totals?

parksjdp

I don't think so and unless they had negative balances, that would only make my problem bigger. I should have $43,641 in AR, however the aging now shows $50,559. The only thing that I can think of is that some adjustments are not hitting the accounts or something like that.

parksjdp

We have only been live for a week and I have all my print-outs from each day and they agree with the reports that are generated from this database, which leads me to believe that changes were not made to older P&I's. Our original aging came right after the coversion so that we could compare to Easy ...

parksjdp

Thanks, I have been keeping my reports, just not aging reports. The only aging report I have is when the conversion was first completed. Here is where my problem is. Aging 9.17.07 $43,055 Aging 9.24.07 $50,559 Difference $7,504 Amounts from P & I for the same period Production $10,247 Adj. $1,949 Pa...

parksjdp

Thanks Jordan

Then to update to 5.2, I would go to the server and update from there? Then all machines would update as they are opened? Is this correct?

parksjdp

My financial software is in Quickbooks. I post entries daily (production amounts by type and AR in one entry) (payments, adjustments, w/o's, etc and AR in second entry) with the net of the 2 equaling my AR as of that day. QB only has a total AR balance not individual patient data. So in short I am l...

parksjdp

Is there a way to get a report that can be used to balance Aging to Quickbooks? I am trying to balance a couple of days last week and it will only allow me to do it with todays balances. Based on my calculations my aging is off quite a bit and I don't know what day it got off or how.

parksjdp

If I make these changes at my remote office over a TS, will I have change them at the main office the next day and then remember to do it each time? Or will it be specific to each workstation and TS session?

parksjdp

I cannot think of any screens in particular, it just seemed sparatic. I think that my screen froze up a couple dozen times on Wed. So if I update to 5.2 and then turn off the bubbles, do I still need to change my graphics for the tooth chart?

parksjdp · 5.1.17.0, I have not tried changing tooth type but will give it a shot. Thanks.

5.1.17.0, I have not tried changing tooth type but will give it a shot. Thanks.

parksjdp

Anyone have any success stories on connecting 2 offices. We were quite disappointed with our connection to our remote office this week, our first week live. We use terminal services for all our workstations for Open Dental, but capture and view images locally. OD would freeze or be very slow via the...

parksjdp

I am need of a couple reports for our office. We have been live for 3 days now and things are going great. If anyone can help or point in the right direction on where to find them it would be appreciated. 1. Production by procedure type (i.e. diagnostic, restorative, endo, etc.) by day. 2. Adjustmen...

Search found 116 matches